Cart
Country/Lang
OK

​​​​​​TurningPramet_web_RGB.jpg

 

We offer wide range of tools and indexable cutting inserts for turning, which are able to cover all your applications. Whether you machine a part with a diameter of several millimeters or several meters, are tools from Pramet Tools ready to meet your requirements. In production we use the latest technology, which ensure high quality and reliability. Choose the right tool from our production.

 

 

Indexable cutting inserts

Indexable cutting inserts.jpg 


The offer of Pramet Steel Age turning tools and indexable cutting inserts, includes solutions for all common operations of general turning (external and internal), parting-off, grooving and threading. 
A great advantage of Pramet assortment is top solution in the field of heavy turning. In the Pramet turning assortment you can always find reliable and accessible solution for machining of all common used materials.

 

go to e-Cat >>

 

 

 

Tools for general turning

Tools for general turning.jpg 


The tools for internal and external turning are a part of Pramet Steel Age products. The tools for negatively placed inserts with P and D (M) clamping and positively placed inserts with S clamping represent the basic offer. The exchangeable and adjustable heads as well as adjustable holders for special tools are also available. The tools for turning of railway wheels also belong to heavy turning segment.

You should not miss

D clamping is the most stable system of the insert clamping. The clamping stability is demonstrated by longer cutting edge life than with P clamping. D, M and P clamping (for negatively placed inserts with a cylindrical hole) are suitable for stable workpieces for roughing to finishing operations depending on the chosen geometry and insert shape. Easy chip evacuation from the place of cutting is also an unquestionable advantage of P clamping.
S clamping is a system of one-side positively placed inserts clamped by screw. Tools withS clamping are used for unstable, long and thin or thin-walled workpieces. This way of clamping is usually used at external and internal tools of small cross-sections. Internal tools with carbide shanks ensuring better quality of the machined hole are also a part of the assortment. An absolutely new segment of S clamping use is the field of heavy roughing where a lighter cut of positively placed inserts is used. 

 

go to e-Cat >>

 

 

Tools for cutting off and recessing

Tools for cutting off and recessing.jpg 


The offer of the tools for parting off and grooving is gradually being enlarged. The older generation of indexable cutting inserts, suitable mainly for material division, is being replaced by new types for lighter operation of parting off and grooving (LFMX) and for internal grooving and copy turning (LCMF). Similarly, the new T8330 grade with PVD coating from the new UP!GRADE line proves successful as a replacement of well-proven 8030.

You should not miss

The GFI tools for the LCMF indexable inserts represent a modern solution for shallow grooving into depth corresponding to triple of the width of the indexable cutting insert. The assortment has newly been completed with GFM holders for the LCMR inserts corresponding to quintuple of the width of the indexable cutting insert and GFK tools and GFK holders for the LCMF cutting inserts of 2 mm width enabling parting off and grooving up to 16 mm depth. The tools for the LCMF inserts combine a possibility of grooving and copy (multidirectional) turning.
We offer the tools with theLFMX inserts for middle-deep and deep parting off and grooving. There are also geometries for fine and rough operations as well as inserts with straight and inclined cutting edge in the assortment. The offer of the inserts ranges from 1.6 mm to 6.35 mm.
A part of the offer is also a complete assortment for slot turning for lock rings (0.9 to 4.15 mm widths) and sealing rings (R0.5 to R1.5 mm). The inserts are clamped into holders for threading and they also have that kind of specification. Instead of lead of thread, the width of groove is given and the profile is ZZ specified (e.g. TN 16ER110ZZ). It is necessary to use a shim with ZZ specification or a tool with 0° inclination angle for grooving.

 

go to e-Cat >>

 

 

Special tools

Special tools.jpg 


We launched every year hunderts of new products, but they are not always to meet your requirements. Therefore, we are ready to design and produce special tools for machining of complicated application as well as tools to reach faster machining cycle. We compile for you complete solution.

What you can expect from us:
- fast answer to Your request
- simple order
- delivery in agreed term
- complete construction tool information​

 

go to e-Cat >>

 

​​​ 

​​

Loading...