The Pramet brand of indexable cutting inserts for turning covers all your application needs. Whether you machine a part with a diameter of several millimeters or several meters, our tools will meet your requirements. We use the latest technology to ensure you consistently receive a high quality result.
The Pramet Steel Age turning tools and indexable cutting inserts includes solutions for all common operations of general turning (external and internal), parting-off, grooving and threading. There is a product for machining of all commonly used materials.
The Pramet Steel Age products are tools for internal and external turning are a part. The tools for negatively placed inserts with P and D (M) clamping and positively placed inserts with S clamping represent the basic offer. The exchangeable and adjustable heads as well as adjustable holders for special tools are also available. The tools for turning of railway wheels belong to the heavy turning segment.
There is a Pramet product for each of your material needs
D clamping is the most stable system of insert clamping. The clamping stability is demonstrated by longer cutting edge life than with P clamping. D, M and P clamping (for negatively placed inserts with a cylindrical hole) are suitable for stable workpieces for roughing to finishing operations depending on the chosen geometry and insert shape. Easy chip evacuation from the place of cutting is also an definitive advantage of P clamping.
S clamping is a system of one-side positively placed inserts clamped by screw. Tools with S clamping are used for unstable, long and thin or thin-walled workpieces. This way of clamping is usually used at external and internal tools of small cross-sections. Internal tools with carbide shanks for better machined hole quality are also a part of the overall offering. A new segment of S clamping use is in the field of heavy roughing where a lighter cut of positively placed inserts is used.
Tools for cutting off and recessing
The tool offering for parting off and grooving is gradually being expanded upon. The older generation of indexable cutting inserts, suitable mainly for material division, is being replaced by new types for lighter operation of parting off and grooving (LFMX) and for internal grooving and copy turning (LCMF). Similarly, the T8330 grade with PVD coating proves successful as a replacement of well-proven 8030.
The possibilities are endless with Pramet
The GFI tools for the LCMF indexable inserts represent a modern solution for shallow grooving into depth corresponding to triple the width of the indexable cutting insert. The assortment has newly been completed with GFM holders for the LCMR inserts corresponding to quintuple the width of the indexable cutting insert and GFK tools and GFK holders for the LCMF cutting inserts of 2 mm width enabling parting off and grooving of up to 16 mm depth. The tools for the LCMF inserts combine a possibility of grooving and copy (multidirectional) turning.
Tools with the LFMX inserts for middle-deep and deep parting off and grooving are avaialable. The offering consists of geometries for fine and rough operations as well as inserts with straight and inclined cutting edge. Inserts range from 1.6 mm to 6.35 mm.
There is also a complete assortment for slot turning for lock rings (0.9 to 4.15 mm widths) and sealing rings (R0.5 to R1.5 mm). The inserts are clamped into holders for threading. It is necessary to use a shim with ZZ specification or a tool with 0° inclination angle for grooving.
The Dormer Pramet engineering teams invest annually in the research and development of new products. Some of these tools do not always meet market requirements; however, they are available to be modified for your special tooling needs. Whether it is a complicated application or you are hoping to reach a faster machining cycle, we work with you to develop a complete solution.Contact us today to find out how we can fulfil your special tooling requirements.